polymer clay extruder|how do u make these kind of polymer clay icing w/o clay extruders link below:?
Query–: how do u make these sort of polymer clay icing w/o clay extruders hyperlink beneath:?
clay extruders are quite expensive can u offer data if i can make my very own clay extruder or how to sculpt these kind of polymer clay icings(backlinks below)or can i use a piping bag w/ nozzle? If i add clay softener & LTS to my clay can it soften adequate that i can use a piping bag?
http://hanmei.deviantart.com/art/Whipped-Cream-Shortcake-88723858
http://anatego.deviantart.com/artwork/Down-the-rabbit-hole-cupcake-117361692
The subsequent is the answer: (Hint: The reader is not the right identification.)
Answer by Diane B.
Very first, a simple clay extruder (aka clay gun) is not expensive at all… close to $ ten for the extruder as well as twenty dies to suit into it. The clay in the back links you gave truly employed icing tips although possibly (…although some of the newer extruders may possibly arrive with icing suggestion-type dies or suggestions).
So there are numerous techniques that styles like these can be extruded, and which ones you’d use would count partly on how soft the clay/liquid clay is when you extrude it. You can make the clay softer by conditioning it extremely properly, and/or warming it in different ways, or by mixing it with a thinner like liquid polymer clay or other factors.
So you could just place a metal icing tip into a hole in the corner of a powerful plastic bag (then add the connector ring to hold it on), or you can rig the icing tip up to a clay gun. Or I’ve completed it sometimes by just pushing little quantities of clay via the icing suggestion with my finger.
If you thin the clay adequate, you can do the very same point with a bag (which wouldn’t have to be as sturdy)… or use other extruders like empty syringes/and so on if you don’t will need a fluted form, etc.
(Keep in mind that for some of people points, you could use or “lose” much more clay than you want because of the amount of clay that is essential for the dimensions of the bag/and so forth.)
There is loads of information on performing all those points on a number of pages at my polymer clay “encyclopedia” site. I’ll try out to come back again in a minute with actual links to people pages, but YA would seem not to be liking actual hyperlinks proper now so you can also just go to individuals pages your self by doing the subsequent (sorry for the problem).
… go to glassattic DOT com
… click on on the very first letters of the subsequent pages from inside of the alphabetical navigation bar (then click on the particular groups specified by a > mark):
MINIATURES >Foods >>Icings, Frostings, Etc.
CLAY GUNS >Icing Suggestions
HTH,
Diane B.
What do you feel? Answer below!
polymer clay extruder
_______________________
Hi,I did the following:,This blog is about polymer info .
Refinement :
Makin’s Extruder Stage three: Insert Clay
Picture by CraftyGoat
Be confident you’ve inserted the rubber O-Ring as far as it can go into the barrel. Then add a cone shaped piece of conditioned polymer clay.
Portion of my weblog post series about the Makin’s Greatest Clay Extruder. Read my viewpoint on the product, plus how-to’s on employing and cleaning it, here:
* Evaluation: Makin’s Final Clay Extruder
* How to Use and Clean the Makin’s Final Clay Extruder
___________________
